Using The Quick Setup - Pioneer VSX-D711 Operating Instructions Manual

02 5 minute guide

Using the Quick Setup

You can use the Quick Setup to get your system
up and running with just a few button presses.
The receiver automatically makes the necessary
settings after you have selected your speaker
setup and room size. If you want to make more
specific settings, refer to Choosing your receiver
setup on pages 38–43. Use the front panel
controls for the steps below.
ADVANCED STEREO/ SIGNAL MIDNIGHT/
SURROUND DIRECT SELECT LOUDNESS SPEAKERS MONITOR
LISTENING MODE
VIDEO INPUT
FL DIMMER
DIGITAL IN
S-VIDEO VIDEO
1 If the receiver is off, press
ON to turn the power on.
The STANDBY indicator goes out.
2 Press QUICK SETUP.
The display prompts you to select your speaker
setup.
3 Use the MULTI JOG/INPUT SELECTOR
dial to choose your speaker setup.
Cycle between the following choices:
3.0ch
7.1ch*
7.0ch*
6.1ch*
* VSX-D811S only
12
En
XRB3013A.07.12
N∫m-Û≥,,
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
INPUT
MULTI JOG SELECTOR
ENTER
MASTER VOLUME
TONE QUICK SETUP
UP
DOWN
MULTI JOG
L AUDIO R
R
STANDBY/
3.1ch 4.0ch
4.1ch
5.0ch
6.0ch* 5.1ch
12
Check the table below to find the speaker
setup that corresponds with your system.
Front Center Surround
Speakers Speaker Speakers
3.0 ch
3.1 ch
4.0 ch
4.1 ch
5.0 ch
5.1 ch
6.0 ch*
6.1 ch*
7.0 ch*
7.1 ch*
* VSX-D811S only
4 Press ENTER.
The display prompts you to select your room
size.
5 Use the the MULTI JOG/INPUT
SELECTOR dial to choose your room size.
Depending on the distance of your speakers
from the listening position, choose between
Small, Medium, or Large (see table below).
S
12 ft.
Front
10 ft. 10 ft.
Center
6 ft.
Surround
3 ft.
Surround Back*
* VSX-D811S only
6 Press ENTER to confirm your setup.
The display shows the speaker setup and room
size that you have selected.
01.12.12, 4:41 PM
Surround Sub
Back Sp. Woofer
(1 speaker)
(1 speaker)
(2 speakers)
(2 speakers)
M L
12 ft. 12 ft.
10 ft.
7 ft. 9 ft.
5 ft. 7 ft.