Searching For Rds Programs; Using Eon; Clearing All Stations From The Rds And Eon Searches - Pioneer VSX-1015-K Operating Instructions Manual

07 Using the tuner

Searching for RDS programs

One of the most useful features of RDS is the ability to
search for a particular kind of radio program. You can
search for any of the program types listed on the previous
page.
STANDBY/ON
TUNER TUNING/
EDIT STATION
TUNER
MULTI
CONTROL
JOG
SYSTEM
SETUP RETURN SEARCH
MULTI JOG MULTI JOG
PHONES
1 Press the BAND button to select the FM band.
RDS is only possible in the FM band.
2 Press the PTY SEARCH button.
SEARCH shows in the display.
3 Use the MULTI JOG dial to select the program
type you want to hear.
4 Press ENTER to search for the program type.
The system starts searching through the station presets
for a match. When it finds one, the search stops and the
station plays for five seconds.
5 If you want to keep listening to the station, press
ENTER within the 5 seconds.
If you don't press ENTER, searching resumes.
If NO PTY is displayed it means the tuner couldn't find
that program type at the time of the search.
Note
• RDS searches station presets only. If no stations
have been preset, or if the program type could not be
found among the station presets NO PTY is
displayed. FINISH means the search is complete.

Using EON

When EON (Enhanced Other Network information) is
turned on, the receiver jumps to an EON-linked
broadcast when it begins, even if a receiver function
other than the tuner is being used. It can't be used in
52
En
LISTENING MODE
SELECT
ENTER
MULTI JOG
MIDNIGHT/ ACOUSTIC DIALOG MULTI CH SIGNAL
BAND MPX LOUDNESS TONE EQ ENHANCEMENT IN SELECT
MULTI
JOG
VIDEO2 INPUT
PTY
MCACC
EON
SETUP MIC
DIGITAL IN S-VIDEO VIDEO
areas that EON information isn't transmitted and when
FM broadcast stations don't transmit PTY data. When the
broadcast ends, the tuner returns to the original
frequency or function.
TUNER
EDIT
TUNER
CONTROL
SYSTEM
SETUP
MULTI JOG
PHONES
1 Press the BAND button to select the FM band.
EON is only possible in the FM band.
2 Press EON to select one of the possible modes.
Press repeatedly to switch between:
• EON TA (Traffic Announcement) – Sets the tuner to
pick up traffic information when it is broadcast.
• EON NEWS – Sets the tuner to pick up news when it
is broadcast.
EXTENDED
MODE SPEAKERS
• OFF – Switches off the EON feature.
When set to TA or NEWS, the EON indicator in the
L AUDIO R display lights (it flashes when receiving an EON
broadcast). The
current station carries the EON service.
Note
• The EON function does not work when listening to
AM reception.
• You can't search for traffic announcements and
news at the same time.
• You cannot operate the TUNER EDIT and PTY
SEARCH buttons while the EON indicator in the
display is lit.
• If you want to change to a function other than the
tuner when the EON indicator is flashing, press EON
to turn EON off.
Clearing all stations from the RDS and EON
searches
The receiver will automatically register an identifying
marker (called a PI code) for any station you input into
the memory classes which can receive RDS or EON data.
If you want to remove the currently memorized stations
from RDS and EON searches, you can do it by erasing the
PI codes.
1 Press and hold EON for about two seconds.
ERASE PI is displayed.
2 Press ENTER.
ERASE PI flashes for two seconds to indicate the PI codes
have been erased.
TUNING/ MIDNIGHT/ ACOUSTIC DIALOG
STATION BAND MPX LOUDNESS TONE EQ ENHANCEMENT
MULTI MULTI
JOG JOG
PTY
MCACC
RETURN SEARCH EON
SETUP MIC
MULTI JOG
DIGITAL IN
indicator in the display lights when the
MULTI CH SIGNAL EXTENDED
IN SELECT MODE SPEAKERS
VIDEO2 INPUT
S-VIDEO VIDEO L AUDIO R