Playing Other Sources; Selecting The Multichannel Analog Inputs; Using The Sleep Timer - Pioneer VSX-1015-K Operating Instructions Manual

Listening to your system

Playing other sources

INPUT
RECEIVER
SELECT
DVD/LD TV/SAT
MULTI CONTROL
CD CD-R/TAPE
1 Turn on the power of the playback component.
2 Turn on the power of the receiver.
3 Select the source you want to playback.
Use the MULTI CONTROL buttons (or INPUT SELECT).
4 Start playback of the component you selected in
step 1.
Selecting the multichannel analog
inputs
If you have connected a decoder or a DVD player with
multichannel analog outputs to this receiver (page 17),
you must select the analog multichannel inputs for
surround sound playback.
TUNER TUNING/ MIDNIGHT/
EDIT STATION BAND MPX LOUDNESS
TUNER
MULTI
CONTROL
JOG
SYSTEM PTY
SETUP RETURN SEARCH EON
MULTI JOG MULTI JOG
PHONES
1 Make sure you have set the playback source to
the proper output setting.
For example, you might need to set your DVD player to
output multichannel analog audio.
2 Press MULTI CH IN on the front panel.
To cancel playback from the multichannel inputs, press
MULTI CH IN once again.
Note
• When playback from the multichannel inputs is
selected, you can't use the ACOUSTIC CAL EQ,
DIALOG E, SIGNAL SELECT, INPUT ATT, TONE, and
MIDNIGHT/LOUDNESS buttons, as well as any of
the listening modes (including STEREO/DIRECT and
the Extended mode).
• When playback from the multichannel inputs is
selected, only the volume and channel levels can be
set.
SOURCE
DVR/VCR TV CONT
TUNER RECEIVER
ACOUSTIC DIALOG MULTI CH SIGNAL EXTENDED
TONE EQ IN SELECT MODE SPEAKERS
ENHANCEMENT
MULTI
JOG
VIDEO2 INPUT
MCACC
SETUP MIC
DIGITAL IN S-VIDEO VIDEO L AUDIO R
• You can't listen to your speaker B (Second Zone)
system during playback from the multichannel
inputs.

Using the sleep timer

The sleep timer switches the receiver into standby after a
specified amount of time so you can fall asleep without
worrying about the receiver being left on all night. Use
the remote control to set the sleep timer.
MPX CH RETURN
AUDIO SUBTITLE
RECEIVER CONTROL
THX STANDARD
ACOUSTIC
EQ
AUTO SURR
EFFECT
SHIFT
/CH SEL
RECEIVER
• Press SHIFT+SLEEP repeatedly to set the sleep
time.
30 min
Off
Note
• You can check the remaining sleep time at any time
by pressing SHIFT+SLEEP once. Pressing repeatedly
will cycle through the sleep options again.
• You can also switch off the sleep timer simply by
switching off the receiver.
HDD DVD
CH CH
ADV.SURR STEREO
SIGNAL MIDNIGHT/
SELECT LOUDNESS
SLEEP DIALOG E
60 min
90 min
05
39
En