Procedures For Testing Video On An Hdmi Source Device - Teledyne Lecroy 780 User Manual

780/780AH Handheld Test Instrument – User Guide Page 78
6.1.2

Procedures for Testing Video on an HDMI Source Device

Use the following procedures to test the video from an HDMI source device. You can view the incoming video
and check the video and timing parameters of the incoming video.
1. Make the physical connection between the 780/780AH HDMI IN port and the source device under test
using the configuration instructions above.
2. Touch select Test Source (DVD/STB) from the top level menu shown below.
November 17, 2016 Revision C2
1.800.561.8187 information@itm.com
www. .com