Configuration For Monitoring Ddc Transactions With The Aca On A Repeater - Teledyne Lecroy 780 User Manual

780/780AH Handheld Test Instrument – User Guide
7. Touch select Stop activation button (top left) to halt the collection of messages.
8. Touch select Clear activation button (top center) to clear the collected of messages.
8.1.6

Configuration for Monitoring DDC Transactions with the ACA on a Repeater

This subsection provide a configuration diagram that depicts ACA monitoring of HDMI repeater devices while
emulating both an HDMI source device and an HDMI sink device.
8.1.7 Procedures for Running an Auxiliary Channel Analyzer Test on HDMI Repeater Devices
This subsection provides procedures for ACA monitoring of HDMI repeater devices while the 780/780AH is
emulating both an HDMI sink device and an HDMI source device.
1. Connect the HDMI system devices to the 780/780AH as shown in the diagram above and described as
follows:
a. The HDMI repeater device input is connected the 780/780AH HDMI OUT connector.
b. The HDMI repeater device output is connected to the 780/780AH HDMI IN connector.
From the main screen (shown below) touch select the Aux Channel Analyzer activation button.
November 17, 2016
1.800.561.8187
www. .com
Page 129
Revision C2
information@itm.com