Procedures For Testing Hdcp On An Hdmi Sink Device - Teledyne Lecroy 780 User Manual

780/780AH Handheld Test Instrument – User Guide Page 63
5.1.2

Procedures for Testing HDCP on an HDMI Sink Device

Use the procedures below to run an HDCP test on an HDMI sink.
1. Make the physical connections between the 780/780AH HDMI OUT connector and the display device
under test.
2. Enable the HDMI output using the procedures at Selecting a Signal Type and Resolution.
3. Touch select Test Sink (Display/TV) from the top level menu shown below.
4. Select HDCP Test from the Sink Tests menu shown below.
November 17, 2016 Revision C2
1.800.561.8187 information@itm.com
www. .com