780/780AH Handheld Test Instrument – User Guide
Page 66
5.2.2
Procedures for Testing and Viewing the EDID on an HDMI Sink Device
Use the procedures below to run an EDID test on an HDMI sink.
1. Make the physical connections between the 780/780AH HDMI OUT connector and the display device
under test.
2. Enable the HDMI output using the procedures at
Selecting a Signal Type and
Resolution.
3. Touch select Test Sink (Display/TV) from the top level menu shown below.
4. Touch select EDID Test from the Sink Tests menu shown below.
November 17, 2016
Revision C2
1.800.561.8187
information@itm.com
www.
.com