Configuration For Passive Monitoring The Upstream Devices While Emulating An Hdmi Sink Device With The Auxiliary Channel Analyzer On Hdmi Devices; Procedures For Passive Monitoring The Upstream Devices While Emulating An Hdmi Sink Device With The Auxiliary Channel Analyzer On Hdmi Devices - Teledyne Lecroy 780 User Manual

780/780AH Handheld Test Instrument – User Guide
9. Touch select Stop activation button (top left) to halt the collection of messages.
10. Touch select Clear activation button (top center) to clear the collected of messages.
8.3.3 Configuration for Passive Monitoring the Upstream Devices while Emulating an HDMI Sink
Device with the Auxiliary Channel Analyzer on HDMI Devices
This subsection provides configuration diagrams that depict ACA passive and emulation monitoring of an HDMI
system.
8.3.4 Procedures for Passive Monitoring the Upstream Devices while Emulating an HDMI Sink Device
with the Auxiliary Channel Analyzer on HDMI Devices
This subsection provides procedures for ACA passive and emulation monitoring of HDMI devices.
Note: You will have to obtain a license key for the ACA passive monitoring option to use the feature.
1. Connect the HDMI system devices to the 780/780AH as shown in the diagram above and described as
follows:
a. The HDMI source is connected to the 780/780AH Upstream Link IN connector.
b. The HDMI repeater device input is connected the 780/780AH Upstream Link OUT connector.
November 17, 2016
1.800.561.8187
www. .com
Page 141
Revision C2
information@itm.com