Procedures For Running An Hdmi Cable Or Network ("Repeater") Test - Teledyne Lecroy 780 User Manual

780/780AH Handheld Test Instrument – User Guide
9.1.2

Procedures for Running an HDMI Cable or Network ("Repeater") Test

This subsection provides procedures for performing an HDMI cable test or a test of an HDMI network
comprised of repeaters, splitters, extenders, switches, etc.
1. For testing an HDMI cable, connect one end of the HDMI cable to the 780/780AH HDMI OUT connect and
the other end to the 780/780AH HDMI IN connector.
For testing an HDMI repeater device such as a repeater, video or audio processor, extender, switch, etc,
connect the 780/780AH HDMI OUT connector to the repeater device input and connect the 780/780AH
HDMI IN connector to the repeater device output.
2. Touch select Cable/Repeater Test from the top level menu shown below.
November 17, 2016
1.800.561.8187
www. .com
Page 148
Revision C2
information@itm.com