Edit Mode - Pioneer Elite VSX-29TX Operating Instructions Manual

MD operations
• The following operations are available from the receiver's remote control after you program your MD
memo
recorder into it, but some operations may need to be learned separately by the receiver (see "Setting Up
the Remote Control to Control Other Components," p. 47-50).
• To perform these operations, press the MD/TAPE 1 button to set the remote to the MD operation mode.
• For more information on individual commands consult the manual that came with the component.
6 7
MD
5
4
REC
3
DISP
2
EDIT
MODE NAME
INPUT
1 ! ~ = -
1 2 3
8
4 5 6
7
8 9
9
0/10 +10
0
Remote Control of Other Components
1
Press to switch the MD recorder on or off.
2 4˜¢
4 : Press to return to the beginning of the current
track. Press repeatedly to return to the beginning of
previous tracks.
¢ : Press to advance to the beginning of the next
track. Press repeatedly to advance to the beginning of
following tracks.
3 1˜¡
1 : Hold down for fast reverse playback.
¡ : Hold down for fast forward playback.
4 ¶ REC
Press to start recording (may put some decks in REC
PAUSE mode)..
5 7
Press to stop playback or recording.
6 3
Press to start playback.
7 8
Press to pause playback or recording.
8 Number buttons
Use to select tracks.
9 +10
You can also use this button when selecting track
numbers higher than 10.
0 0/10
Use to select tracks with high numbers. The button
will increase the track number in increments of ten.
- NAME
Use to name tracks or programmed selections

= EDIT MODE

Allows you to edit names and numbers of tracks.
~ DISP
Allows you to change the display mode of the MD.
! INPUT
Switches between the analog and digital input.
53