Multi-Edit Mode; Returning To The Initial Settings - Pioneer VSX-502 Operating Instructions Manual

VSX-512S REMOTE CONTROL OPERATION
MULTI-EDIT MODE
A maximum of seven commands can be programmed into MULTI
COMMAND button. This enables a series of signals to be transmitted
simply by pushing the MULTI COMMAND button.
(Example) Programming the following three commands into the MULTI
C@OMMAND button.
@ RECEIVER POWER
NA
@ RECEIVER FUNCTION CD
SCD PLAY (>)
1. Press the EDIT button. (Switches to the EDIT mode}
* The VCR 1, VCR 2, and TV CONTROL MODE buttons flash in
sequence.
mode)
* The CONTROL MODE buttons flash at random.
3. Press the RECEIVER POWER button.
© The CONTROL MODE buttons go out, and then flash at random.
(Registration is completed)
4. Press the CD receiver input selector button.
© The CONTROL MODE buttons go out, and then flash at random.
(Registration is completed)
5. Press the CD CONTROL MODE button.
* The CD button flashes.
6. Press the PLAY (> ) button.
* The CD button goes out, and then the CONTROL MODE buttons
flash at random. (Registration is completed)
7. Press the MULTI COMMAND button.
* The CONTROL MODE buttons light in sequence (This means that
registration has been completed), and then the VCR 1, VCR 2,
and TV buttons flash in sequence.
8. Press the EDIT button.
* The EDIT mode is canceled.
NOTE:
RETURNING TO THE INITIAL SETTINGS
Initialization of particular CONTROL MODES
1. Remove the battery compartment cover.
M-CLEAR button
Initializing the entire memory
1. Remove the battery compartment cover.
RESET button.
RESET button M-CLEAR button
A
ZY
"CONN
Se
43
<ARB1419>