Cd Player Operations - Pioneer Elite VSX-29TX Operating Instructions Manual

Remote Control of Other Components

CD player operations

• The following operations are available from the receiver's remote control after you program your CD
memo
player into it, but some operations may need to be learned separately by the receiver (see "Setting Up the
Remote Control to Control Other Components," p. 47-50).
• To perform these operations, press the CD button to set the remote to the CD operation mode.
• For more information on individual commands consult the manual that came with the component.
6 7
CD
5
4
DISC
3
TRACK
2
PRGM RDM
1 ! ~ = -
52
1 2 3
8
4 5 6
7 8 9
9
10 0/10
C
0
1
Press to switch the CD player on or off.
2 4˜¢
4 : Press to return to the beginning of the current
track. Press repeatedly to return to the beginning of
previous tracks.
¢ : Press to advance to the beginning of the next
track. Press repeatedly to advance to the beginning of
following tracks.
3
1˜¡
1 : Hold down for fast reverse playback.
¡ : Hold down for fast forward playback.
4 DISC
Use to switch between discs with file type disc
players.
5 7
Press to stop playback.
6 3
Press to start playback.
7 8
Press to pause playback.
8 Number buttons
Use to select tracks.
9 C
Use to clear tracks or programmed selections
0 0/10
Use to select tracks with high numbers. The button
will increase the track number in increments of ten.
- >10
You can also use this button when selecting track
numbers higher than 10.
= RDM
Use to select the random playback function. The CD
player will play all the tracks on the disc in a random
order.
~ Track
Use to select the track (not possible with all models).
! PRGM
This button allows you to program a series of tracks
into the tracks into the CD player (may not be
possible with some CD players).