Listening In Loudness Mode; Adjusting Bass And Treble (Tone Control) - Pioneer Elite VSX-29TX Operating Instructions Manual

Listening in LOUDNESS mode

The LOUDNESS mode allows you to boost the bass in a signal. It is useful for listening to music at low volumes.
Receiver
MAIN
DSP STEREO
/ dts
ADVANCED
THX
STANDARD
THEATER
MIDNIGHT DIRECT
DIGITAL
LOUDNESS
NR
LOUDNESS
LOUDNESS

Adjusting bass and treble (tone control)

Use BASS (+/–) or TREBLE (+/–) to adjust the low and high frequencies (the receiver must be in STEREO mode).
BASS +/–
Receiver
MAIN
TAPE 2
EXTERNAL
MONITOR 5.1CH
BASS
INPUT
ATT.
CH
LEVEL
BASS –/+ TREBLE –/+
SUB
Press LOUDNESS on the remote control's Receiver
MAIN screen or on the front panel.
EFFECT
Each press switches LOUDNESS mode on or off.
SIGNAL
SELECT
memo
TREBLE +/–
Press BASS (+/–) on the remote control's Receiver
SUB screen or on the front panel to adjust the low
SUB
frequencies.
TREBLE
SYSTEM
SETUP
Press TREBLE (+/–) on the remote control's Receiver
SUB screen or on the front panel to adjust the high
frequencies.
memo
SIGNAL LOUDNESS STEREO
SELECT
ANALOG SP A
AUTO
You can't use the LOUDNESS mode with the THX, DIRECT or
EXTERNAL DECODER modes.
SIGNAL STEREO
SELECT
ANALOG SP A
SIGNAL STEREO
SELECT
ANALOG SP A
• The tone control can be adjusted in a range of ±6 dB.
• The tone control cannot be adjusted in STANDARD,
ADVANCED THEATER modes as well as DSP, THX,
EXTERNAL DECODER, DIRECT, and 96kHz settings.
Basic Playback
VOLUME
dB
VOLUME
dB
VOLUME
dB
41