Initial Set Up; On Screen Display; Setting Up The Remote Control - Pioneer Elite VSX-29TX Operating Instructions Manual

Initial Set Up

On Screen Display

There are a number of possible ways to hook up the receiver to your video components, like a DVD player, and hook up
to your receiver to your TV, but some of them won't allow you to use the on-screen display of this unit. To avoid this
one simply needs to follow two rules.
1 Always use the same type of video cords to hook up your video components to the receiver as you use to hook up
the receiver and your TV. For example, if you use composite video cords to hook up your DVD and the receiver, use
composite video cords to hook up the receiver to your TV. If you use S video cords to hook up your DVD and the
receiver, use S video cords to hook up the receiver to your TV.
2 Always make sure your TV is set to the appropriate input channel (for example, video 1). Your TV may have a
number of input channels and if you don't select the proper one you won't be able to use this receiver's on-screen
display, or, in fact, see any picture from this receiver at all. If you are unsure how to choose an input channel for your
TV, refer to the manual which came with your TV.
You might, for example, use both composite and S video cords to hook up your video components with this receiver
and then use composite video cords to hook up this receiver to your TV. This arrangement would still NOT let you see
the on screen displays from this receiver on your TV. The best idea is just to use one type of video cord for all your
video component and TV hook ups.

Setting Up the Remote Control

Since this remote is based on LCD screens, you should try and get used to the touch-sensitive nature of the buttons as
well as the way in which different screens control different operations. You can move between the different screens
with the function buttons on the left and right and/or certain buttons within each screen. The EXIT button will always
return the remote control to the previous screen. In the explanations below you must complete the TOUCH PANEL
ADJUSTMENT setup to use the remote control properly. After that you can adjust various basic settings to suit your
personal preferences.
2
Remote Setup
RECEIVER
LCD
MULTI OPERATION
COMMANDER
DVD/LD
DIRECT FUNCTION
PRESET RECALL
TV/SAT
LEARNING
VCR1
VCR2
3
LCD Commander
RECEIVER
TOUCH PANEL
ADJUSTMENT
DVD/LD
LCD CONTRAST
TV/SAT
10
LCD TIMER :
VCR1
VCR2
1
1
EXIT
2
REMOTE
SETUP
MD/TAPE1
CD
3
TUNER
TV
CONTROL
EXIT
REMOTE
SETUP
BEEP ON
MD/TAPE
CD
SEC
TUNER
TV
CONTROL
Press REMOTE SETUP on the remote control.
Access to the different setup modes appear on your remote
control screen.
Press the LCD COMMANDER button.
The different types of possible adjustments will appear on the
screen.
You must align the touch panel to make sure the
remote control responds properly when you touch
it. Press TOUCH PANEL ADJUSTMENT button.
21