Radar Connection Box Rcb-002 (Option) - Furuno FMD-3200 Installation Manual

2. WIRING
10. Set the shields of cables under the cable clamp then tighten the cable clamp.
11. Remount the processor unit cover.
2.6

Radar Connection Box RCB-002 (option)

The RCB-002 is capable of connecting the FMD-3 00 with up to two external radar
systems. Referring to the figure below, connect the respective equipment to the RCB-
002.
NETWORK
To HUB-3000
MOD-WPAS0001-030+
(3 m) cable
Connecting LAN cables
When connecting LAN cables (MOD-WPAS0001-030+) to the RCB-002, use the fol-
lowing procedure.
1. Unfasten and remove the sealing nut from the
NETWORK port on the RCB-002, then remove
the seal assembly. See the right figure for ref-
erence.
2-38
RADAR SIGNAL IN No.1
To external radar
MJ-A10SPF0020A (5m, 10 m, 20 m, 30 m) cable
RADAR SIGNAL IN No.2
To external radar
MJ-A10SPF0020A (5m, 10 m, 20 m, 30 m) cable
POWER
To PR-240
MJ-A3SPF cable
Unused
Lay shields of cables
under this clamp then
tighten the clamp.
To ship`s ground
Ground cable, IV-1.25sq.
Seal assembly
Claw
Seal nut
Seal