TP-Link AC50 Configuration Manual page 54

Figure 7-10 Local Authentication Server Page
Status
SSID
Splash Page
Authenticaiton Server
Type
Success Redirect URL
Fail redirect URL
Non-sense
Authentication
Advertisement
Specify the status of the entry.
Specify the SSIDs of the Web authentication.
Note: The SSIDs abeled "Bound" are being used by other authentication entries.
If these SSIDs are selected, the original configuration will be replaced by the
current configuration.
Select the splash page of the Web authentication.
Specify the server type of the Web authentication. Here we select Local
Authentication Server.
Specify the redirect URL address after successful authentication.
Specify the redirect URL address after the authentication failure.
With this option enabled, the non-sense authenticated users will pass the
authentication automatically when connecting to the wireless network.
Specify whether to enable the Advertisement feature. With this feature
enabled, you can add advertisement pictures on the authentication page.
These advertisement pictures will be displayed before the login page appears.
You can also allow users to skip the advertisement by enabling Allow to Skip
Advertisement.
50