Firmware Upgrade; Traffic Statistics - TP-Link AC50 Configuration Manual

9.2.4 Firmware Upgrade

Choose the menu System Tools > Administration > Firmware Upgrade to load the
following page.
Figure 9-7 Reboot
Here you can upgrade your firmware. Please back up your configurations before upgrading.
Click Browse to locate the firmware file, then click Upgrade to upgrade your firmware.
For the latest firmware version, please go to www.tp-link.com
Firmware Version
Hardware Version
Note:
• DO NOT power off your device or refresh the page during the upgrade. The device will reboot after the
upgrade is complete.
• The configurations may be lost after upgrading. Please back up your configurations before upgrading.

9.3 Traffic Statistics

Choose the menu System Tools > Traffic Statistics > Interface Statistics to load the
following page.
Figure 9-8 Interface Statice
Here you can view the traffic statistics of the interfaces and click the header to display the
data in ascending or descending order.
Interface
TX Rate (Kb/s)
Displays the current firmware version.
Displays the current hardware version.
Displays the current enabled interface of the device.
Displays the rate data frames are transmitted.
102