Radius Server - TP-Link AC50 Configuration Manual

1 Configure the Radius Server. Choose the menu Authentication > Authentication Server
> Radius Server.
2 Configure the Server group. Choose the menu Authentication > Authentication Server
> Authentication Server Group.

7.5.1 Radius Server

Choose the menu Authentication > Authentication Server > Radius Server to load the
following page.
Figure 7-29 Radius Server
Here you can add, edit or delete an external radius server.
Click
Figure 7-30 Add a Radius Serve
Server Name
Server Address
Authentication Port
to add a new entry.
Specify a name for the Radius server.
Specify the address of the server. It should be an IPv4 address or a DNS
domain.
Specify a port for the server to monitor the authentication packets.
70