Client Status - TP-Link AC50 Configuration Manual

2.2 Client Status

Choose the menu Status > Client Status > Client Status to load the following page.
Figure 2-2 Client Status
You can check the information of the connected clients on this page. Select the desired
clients by checking the boxes in front of the entries. Click the buttons above the list for
additional operations.
Select the Group
Disconnect
Search
Global Search
Refresh
Auto Refresh
Select the group from the drop-down list to see the clients' information in the
corresponding group.
Disconnect one or more clients from the AP(s).
Search the specified clients in the list.
Search the specified clients globally.
Refresh the list manually.
Check the box to enable the Auto Refresh function. With it enabled, the list will
refresh every few seconds automatically.
Disconnect the client from the AP in this corresponding entry.
8