Ports - TP-Link AC50 Configuration Manual

3.3.2 Ports

Choose the menu Network > VLAN > Ports to load the following page. Specify the link type
and PVLD for each port. The link type and PVID can not be modified at the same time.
Figure 3-10 Ports
Link Type
PVID
Note:
AC50 doesn't include a General port link type.
The ports can be divided into three link types:
Access: The access port can be added in a single VLAN, and the egress rule
of the port is UNTAG. The PVID is same as the current VLAN ID. If the current
VLAN is deleted, the PVID will be set to 1 by default.
Trunk: The trunk port can be added in multiple VLANs. The egress rule of the
port is UNTAG if the arriving packet's VLAN tag is the same as the port's PVID,
otherwise the egress rule is TAG. The PVID can be set as the VID number of any
valid VLAN.
General: The general port can be added in multiple VLANs and set various
egress rules according to the different VLANs. The default egress rule is
UNTAG. The PVID can be set as the VID number of any valid VLAN.
Enter the VLAN ID of the port.
18