Setup (Mac); Device Recognition (Mac); Software Installation (Mac) - SoftBank 004Z User Manual

Setup (Mac)

Device Recognition (Mac)

With USIM Card installed, insert modem USB plug into Mac
USB port. Mac should automatically recognize modem
within approximately 45 seconds.
4
System message appears upon modem recognition. See
"Software Installation (Mac)" to install SoftBank 004Z
Utility.
4-2
• Modem may fail if Mac enters sleep mode, etc. with it
connected. Remove modem before leaving a Mac unattended,
etc. Modem may malfunction if connected before Mac starts/
restarts. Remove modem before starting or restarting Mac.

Software Installation (Mac)

Installing SoftBank 004Z Utility
Use this modem to access Network or adjust settings.
All screenshots and procedures based on Mac OS 10.6.
• Do not remove modem during installation. May cause
installation failure, system malfunction or other system errors.
Power on Mac and initiate Mac
Insert modem into Mac
If icon appears on desktop, double click it. "SoftBank 004Z
Utility.mpkg" folder opens automatically.