Handheld Transmitter Controls - X2 Digital Wireless Systems XDR-95x User Manual

Handheld Transmitter Controls

Power/Set Button
Power Function: Press once to turn the unit on. Press and hold 3 seconds to turn the unit off.
Set Function: This is used for controlling the LCD interface. Use this button to put the transmitter in different modes of operation, accept
selected values or to exit without making any changes.
Select Button
This is used for controlling the LCD interface. Use this button to make parameter selections or increase a value.
LCD Panel
View transmitter performance status and allows the programming of operating channel settings, RF power level settings and lockout
mode.
FIGURE 8
Main View
FIGURE 9
6
Locked View