Table of Contents
Advertisement
Receiver Connections
Antenna A & B Input Connector (BNC)
Diversity antenna inputs A and B. For correct operation connect the supplied detachable antenna by pressing on the BNC connector
and twisting clockwise for ~1/2 turn. NOTE: Antenna inputs ARE NOT DC biased.
Cable Grip
Thread the power supply cable into the CABLE GRIP to secure the connection as shown in figure 3.
DC Power Input
DC socket for connection of power supply, 9V DC 500 mA (supplied).
Instrument Output Jack
This 1/4" unbalanced TRS output jack (1.8 kΩ) is voiced at the tip for instrument applications (gentle high-frequency role off at 8 kHz
approximates sound of a 15' cable), and full bandwidth (10 Hz to 20 kHz) on the ring. Great for 'tuner' out or dual amp setups.
Balanced Low Z
Balanced XLR, 600Ω, full-bandwidth output (10 Hz to 20 kHz).
FIGURE 2
FIGURE 3
3
Advertisement
Table of Contents
