Table of Contents
Advertisement
Introduction
Created specifically for performing vocalists and musicians who demand to be untethered without compromis-
ing their sound, the XDR95x 24-bit digital wireless system delivers your exact performance with the sound
and feel of a direct wire connection all with extended range and added protection from outside RF interference.
X2's proprietary digital technology provides superior fidelity while the XDR-95x's rack-mount receiver houses a micro-processor
that selects the digital data stream from among the four internal receivers to eliminate dropouts and interference including DTV
and other digital signal sources. You'll enjoy the sound and performance of a direct wire connection free from compander ICs -
and the associated 'pumping' and 'breathing' - that squash your tone, as well as other problems associated with analog wireless
technology.
Operating the system is unlike any wireless you've tried before. Simply grab the microphone or connect the transmitter to the source via
the 1/8" threaded-collar locking connector, then connect the rackmount receiver to your amplifier or mixer. Finally, power up making
sure the transmitter and receiver are set to the same channel. That's it. You're ready to go! The XDR-95x is free of the typical setup
complications of other systems meaning you're up and running in the time it would take to connect a cable. For greater operating range,
attach the included 1/2 wave antenna to the BNC connectors on the back panel of the receiver. And for even greater flexibility, the sys-
tem ships complete with a front-mount antenna kit that allows you to bring the BNC connectors and antenna out to the front of the re-
ceiver unit.
About the XDR95x Digital Wireless System
All of this sound and performance is provided to you with an incredible feature set including:
• 24-bit digital converters deliver your exact performance without the use of companders
• >118 dB dynamic range to capture your most expressive performances
• 2009 Compliant means no FCC or DTV concerns
• Q-DiversityPLUS™ dual-frequency transmission eliminates dropouts, multipathing and interference
• Five user-selectable channels (all five are fully compatible for simultaneous use)
• Full bandwidth frequency response 10 Hz - 20 kHz
• Balanced XLR and unbalanced 1/4" TRS outputs
• No menus to scroll through!
• Real-time LEDs display critical performance indicators including: operating channel, RF status, link status, audio level, diversity mode
and transmitter battery life
With the XDR95x Digital UHF Wireless System you'll have the freedom and sound to deliver your most expressive performance
every time without any hassles or complicated setup procedures.
Thank you for choosing X2!
We have designed this product to give you reliable operation for many years to come. Over 10 years of accumulated expertise in the
design and manufacture of high-quality digital wireless systems have made X2 the leading company in this field. To familiarize you with
your new digital wireless system, we suggest that you read through this entire operation manual.
1
Advertisement
Table of Contents
