Transmitter Connectors; Instrument Input; Microphone Input - X2 Digital Wireless Systems XDR-95x User Manual

Transmitter Connectors

FIGURE 13
Threaded Sleeve
Secure the 1/8" TRS unbalanced jack plug in place by screwing down the threaded sleeve onto the input jack socket threads and turn
approximately two times.
Jack Plug
For correct operation, the jack plug must be inserted all the way into the jack socket with the threaded sleeve securely fastened to the
threaded input jack socket.
Threaded Input Jack Socket
Make certain that a secure connection is made for trouble-free operation.

Instrument Input

The instrument input circuit is wired to the ring of the input jack plug and socket.
NOTE: When using anything other than an X2 instrument cable, make certain to ground the tip when using this input (impedance is 1.3
MΩ).

Microphone Input

The microphone input circuit is wired to the tip of the input jack plug and socket.
NOTE: When using any other microphone not supplied by X2, make certain to ground the ring when using this input (impedance is
10KΩ).
NOTE: ~9V DC is supplied at the tip.
11