Table of Contents
Advertisement
Antenna Installation
How to Connect the Supplied Antenna
Connect the supplied detachable antennas to the Antenna A and B inputs located on the back panel of the receiver and twist clockwise
for ~1/2 turn as shown in figure 4.
NOTE: Antenna inputs ARE NOT DC biased
Preparing Rack Ears for Installation
Connect the supplied BNC connector to each rack ear prior to installing the rack ears to the chassis. Make
certain that the nut goes on the back side of the rack ear as shown in figure 5.
Rack Ear Installation
Only mount rack ears onto the chassis with supplied 1/4" hex screw and washers making certain to place a
washer on each side of the rack ear as shown in figure 6.
FIGURE 4
FIGURE 5
FIGURE 6
4
Advertisement
Table of Contents
