Listening To The Radio; Playback; Playing A Usb Device - Sony RSX-GS9 Operating Instructions Manual

E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
010COV.book Page 12 Thursday, July 2, 2015 2:07 PM

Listening to the Radio

Listening to the Radio
To listen to the radio, press SOURCE (SRC) to select
[Tuner].
Use the remote commander to perform the
following.
Storing automatically (BTM)
1
Press MODE to change the band (FM1,
FM2, FM3, AM1 or AM2).
Alternatively, press
the band.
2
Press and hold MENU, press
select [General], then press ENTER.
3
Press or to select [BTM], then press
ENTER.
The unit stores stations in order of frequency on
the number buttons.
Tuning
1
Press MODE to change the band (FM1,
FM2, FM3, AM1 or AM2).
Alternatively, press
the band.
2
Perform tuning.
To tune manually
Press and hold or
approximate frequency, then press
repeatedly to fine adjust to the desired
frequency.
To tune automatically
Press or (Alternatively, press and hold
or on the unit for more than 1 second.)
Scanning stops when the unit receives a station.
Storing manually
1
While receiving the station that you want
to store, press and hold a number button
(1 to 6) until [MEM] appears.
Receiving the stored stations
1
Select the band, then press a number
button (1 to 6).
Alternatively, press
12
GB
on the unit to change
or to
on the unit to change
to locate the
or
or on the unit.

Playback

Playing a USB Device

In these Operating Instructions, "iPod" is used as a
general reference for the iPod functions on an iPod
and iPhone, unless otherwise specified by the text
or illustrations.
For details on the compatibility of your iPod, see
"About iPod" (page 20) or visit the support site on
the back cover.
MSC (Mass Storage Class)-type USB devices (such as
a USB flash drive, digital media player, Android
phone) compliant with the USB standard can be
used.
Depending on the digital media player or Android
phone, setting the USB connection mode to MSC is
required.
Notes
For details on the compatibility of your USB device,
visit the support site on the back cover.
During USB playback via the USB type-A port, a DSD
file on the connected device is converted into PCM
format.
Playback of the following files is not supported.
MP3/WMA/AAC/FLAC:
copyright-protected files
DRM (Digital Rights Management) files
Multi-channel audio files
MP3/WMA/AAC:
lossless compression files
WAV:
Multi-channel audio files
1
Connect a USB device to the USB type-A
port (page 11).
Playback starts. (Depending on the file
organization, playback may take time to start.)
If a device is already connected, to start
playback, press SOURCE (SRC) to select [USB1] or
[USB2] ([iPod1] or [iPod2] appears in the display
when the iPod is recognized).
2
Adjust the volume on this unit.
To pause playback
Press .
To remove the device
Stop playback, then remove the device.
To display the sampling frequency and bit
rate
Press DSPL during playback.
While DSD playback is performed via USB1 or USB2,
the sampling frequency and bit rate before
converting into the PCM format are displayed.
masterpage: Left
RSX-GS9
4-577-101-11(1)