Sony RSX-GS9 Operating Instructions Manual page 36

E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
010COV.book Page 36 Thursday, July 2, 2015 2:07 PM
High level input connection
For details on the connection, refer to the manual
supplied with your audio device.
Left speaker
White
output
White/black striped
Right speaker
Gray
output
Gray/black striped
Audio device with
speaker outputs
Optical connection
This OPTICAL OUT is designed for connecting a
power amplifier with an optical input. When
another digital device is connected, the functions
of the device may not work properly.
When making connections, do not bend the
optical cable (not supplied). Doing so may
prevent output of sound.
When the optical connection is made:
the volume controls on the unit and the remote
commander do not work.
[Subwoofer], [Pos Custom], [EQ10 Preset],
[Balance], [Fader] and [DSEE-HX] are
automatically set to [OFF].
No sound is output while native DSD playback
is performed via the USB micro-B port.
Power amplifier connection
Stop using the unit and the power amplifier that is
not supported a High-Resolution Audio, when
unusual noise is generated.
Memory hold connection
When the yellow power supply lead is connected,
power will always be supplied to the memory
circuit even when the ignition switch is turned off.
36
GB
To capture your voice during handsfree calling, you
need to install the microphone
White
White/black striped
Gray
Gray/black striped
Cautions
Note
Before attaching the double-sided tape
surface of the dashboard with a dry cloth.
Installing the microphone
Clip (not supplied)
It is extremely dangerous if the cord becomes
wound around the steering column or gearstick.
Be sure to keep it and other parts from interfering
with your driving operations.
If airbags or any other shock-absorbing
equipment is in your car, contact the store where
you purchased this unit, or the car dealer, before
installation.
masterpage: Left
.
, clean the
RSX-GS9
4-577-101-11(1)