Updating With A Memory Card (Dtx-1800, Dtx-1200); Updating The Limits Or Cable Types Database - Fluke DTX Series User Manual

Updating with a Memory Card (DTX-1800, DTX-1200)

You can update the tester's software using a memory card
that contains the software update file.
1 Download the DTX CableAnalyzer update file from the
Fluke Networks website, or contact Fluke Networks to
get the update by other means. Save the file to your
hard drive.
2 Copy the software update file to a memory card.
3 Connect the tester and smart remote together using a
permanent link and a channel adapter or two channel
adapters and a patch cord. Turn on the tester and the
smart remote.
4 Put the memory card in the tester.
5 Turn the rotary switch to SPECIAL FUNCTIONS; then
select Update Software.
L
6 Press Yes to start the update procedure.
7 When the tester is updated, it reboots, then prompts
you about updating the smart remote's software.
K
Press OK to update the smart remote's software.
8 To verify the update, turn the rotary switch to SPECIAL
FUNCTIONS; then select Version Information.

Updating the Limits or Cable Types Database

Fluke Networks may release a test limits or cable types
database that is not part of a software update. To install a
new database in your tester, use the Modify DTX Test
Limits utility in LinkWare software. See the LinkWare
online help for details.
Maintenance
67