Real Time Clock; Master Reset - Trans instruments WalkLAB HP 9010 Operation Manual

Rtc

- REAL TIME CLOCK

This setting allows you to change the date and time
on the meter.
1. Press the ENTER
show clock with hour digit blinking.
2. Press the SELECT
3. Press the ENTER
Minute then Day, Month and Year on each
instance. While digit is blinking, repeat step 2~3 to
set digit.
4. After setting Year and
5. Press the
SELECT
RST

- MASTER RESET

This setting allows you to reset the unit to the original factory's default.
Original factory default:
Buffer Standard = I I I I SO
Auto Shutoff
1. Press the
ENTER
blinking.
2. Press the
SELECT
between yes yes and no
yes yes
3. Press the
ENTER
4. Press the
SELECT
EXIT key to return to measuring mode.
key to begin setting; display will
key up or down to scroll digit.
key to confirm or move to set
ENTER
key up for next setting.
SO
SO SO
=1s 1s minutes
1s 1s
key to set; display will show no
key up or down to choose
no no no
key to confirm.
key up to repeat from beginning or
, clock is up to date.
7
EXIT
no no no no
EXIT
rtc
2 : 04
pm
SETUP
ENTER
SELECT
rSt
SETUP
ENTER
SELECT