Subscribe to Our Youtube Channel
Related Manuals for Trans instruments Marine Salt Testa
Summary of Contents for Trans instruments Marine Salt Testa
- Page 1 8,1,8,1,2,7,2,7,6,3,6,3,4,5,4,5 Marine Salt Testa Digital meter for the measurement of salinity, specific gravity and temperature Operation Manual...
- Page 2 1. PRECAUTION The Marine Salt testa is for the sole purpose of measuring the Temperature, Salinity and Specific Gravity of natural seawater and / or synthetic seawater. This meter has been factory calibrated and performance tested to ensure accurate readings.
- Page 3 2. Product Diagram and Functions HOLD (CAL) ON/OFF Button Button DISPALY PROBE SENSOR BATTERY CAP Rinse sensor with water MODE Turn anti-clockwise to before and after each test. (SEL) open and clockwise to After a series of tests, wash Button close sensor with mild dishwashing liquid and rinse...
-
Page 4: Product Specification
2.2 Display Definition: ° C / ° F Indicates the Temperature of the sample. Indicates the Salinity of the sample. Is displayed in the LCD display window when the HOLD measured value is put on hold or freezed. Appears when the measurement is outside the normal testing range. - Page 5 4. Measurement of Salinity, Temperature and Specific Gravity 4.1 Principle of salinity measurement The salinity measurement principle of this product is base on the electric conductivity measurement method. Salt exists as sodium ion and chloride ion within aqueous solution. As the quantity of sodium ion and chloride ion increases, the solution conductivity also increases proportionately to the increased salt concentration.
- Page 6 5. Calibration 1. Perform calibration regularly or before a series of tests. 2. Use only 30ppt standard solution for this procedure. 3. Make calibration only in liquid of between 15 to 30°C 4. Switch on unit and press MODE button once to switch to salinity mode (ppt).
-
Page 7: Replacement Of The Battery
7. Replacement of the Battery When the sign appears on the LCD display, the batteries will need replacement. The unit will automatically shut-off when battery life is out. How to replace the batteries 1. Uscrew the battery cap and open it. Pull out the battery holder, Take a note at the directions of each battery placed and remove all of them. -
Page 8: Warranty
Please obtain authorization from Trans Instruments (Singapore) Pte Ltd. Directly or through your local sales representatives prior to returning the product. Trans Instruments staff can be contacted at the following email address or through our web-page contacts: sales@transinstruments.com (Singapore) Pte Ltd email: sales@transinstruments.com...
Need help?
Do you have a question about the Marine Salt Testa and is the answer not in the manual?
Questions and answers