Using The Quick Setup - Pioneer VSX-415-S/-K Operating Instructions Manual

5 minute guide

Using the Quick Setup

You can use the Quick Setup to get your
system up and running with just a few button
presses. The receiver automatically makes the
necessary settings after you have selected your
speaker setup, room size and listening
position.
• VSX-515 only – If you want a more complete
setup option, refer to Automatically setting
up for surround sound (MCACC) on
page 13. If you choose to do so, you can
skip the Quick Setup.
If you want to make more specific settings,
refer to Choosing your receiver setup on
page 40 (VSX-415) or The System Setup menu
on page 44 (VSX-515).
Use the front panel controls for the steps
below.
CD FM
CD-R/TAPE/MD
ADVANCED ST/DIRECT SIGNAL
STANDARD SURR /AUTO SURR SELECT
LISTENING MODE
STANDBY / ON
PHONES
* Illustration shows the VSX-515 model
VSX-515
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
MULTI JOG
ENTER
AM
MASTER
VOLUME
MCACC
SETUP MIC
DOWN UP
DVD/LD DVD 5.1 TV/SAT DVR/VCR
EON PTY SPEAKER EXTENDED ACOUSTIC
MODE SEARCH IMPEDANCE MODE EQ
MULTI JOG
TUNING TUNER QUICK SYSTEM
CLASS /STATION EDIT TONE RETURN
SETUP SETUP
MULTI JOG
1 If the receiver is off, press
STANDBY/ON to turn the power on.
2 Press QUICK SETUP .
• VSX-515 model only – SW DET flashes in the
display while the receiver checks your
setup for a subwoofer. SW YES or SW NO
confirms the subwoofer check, then the
display prompts you to select your speaker
setup.
3 Use the MULTI JOG dial to choose your
speaker setup.
VSX-415 model:
The following choices are available:
2.0ch 2.1ch
5.1ch
5.0ch 4.1ch
VSX-515 model:
When a subwoofer was detected in step 2, the
following choices are available:
2.1ch
7.1ch
6.1ch
If a subwoofer wasn't detected in step 2, you
can cycle between the following choices:
2.0ch
7.0ch
6.0ch
3.0ch
3.1ch
4.0ch
3.1ch
4.1ch
5.1ch
3.0ch
4.0ch
5.0ch
02
11
En