Pioneer VSX-415-S/-K Operating Instructions Manual page 28

05 Controls and displays
VSX-515 model only – 2 PRO LOGIC II x lights
to indicate Pro Logic IIx decoding (see
Listening in surround sound on page 31 for
more on this).
5 VIR.SB
Lights during Virtual surround back
processing (page 37).
6 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls
and channel levels for the most accurate
reproduction of a source.
7 AUTO SURR. (VSX-515 model only)
Lights when the Auto Surround feature is
switched on (see page 31).
8 ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the analog input signal.
9 SLEEP
Lights when the receiver is in sleep mode
(page 39).
10 Tuner indicators
• / MONO – Lights when the mono mode
is set using the MPX button.
/ STEREO – Lights when a stereo FM
•
broadcast is being received in auto stereo
mode.
/ TUNED – Lights when a broadcast is
•
being received.
11 EON
EON lights when the EON mode is set, and
flashes during reception of an EON
broadcast. The
current station carries the EON service
(page 56).
RDS
Lights when an RDS broadcast is received
(page 55).
28
En
indicator lights when the
12 Speaker indicator
Shows if the speaker system is on or not. SP A
means the speakers are switched on. SP
means the headphones are connected.
13 Character display
14 Neo:6 (VSX-515 model only)
When the (STANDARD) Neo:6 mode of the
receiver is on, this lights to indicate Neo:6
processing.
15 ADV.SURR. (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
16 WMA9 Pro (VSX-515 model only)
Lights to indicate decoding of a WMA9 Pro
signal.
17 MIDNIGHT
Lights during Midnight listening (page 38).
18 D.E. (VSX-515 model only)
Lights when Dialog Enhancement (DIALOG E)
is switched on (page 38).
19 LOUDNESS
Lights during Loudness listening (page 38).
20 EX
Lights when a Dolby Digital Surround EX
encoded signal is detected.
21 Master volume level
Shows the overall volume level. ---dB indicates
the minimum level, and - 0 dB indicates the
maximum level.
Depending on your level settings for each
channel, the maximum volume can range
between –10 dB and –0 dB.
22 MCACC channel EQ indicators (VSX-515
model only)
These indicators show the EQ balance for each
channel when checking your Acoustic
Calibration EQ settings. See Checking your
Acoustic Calibration EQ settings on page 48 for
more on this.