Virtual Dmz - Netronix W433D User Manual

Virtual Server Settings
Items
Enable This Rule
Application Select
LAN Server IP
Port Range
Protocol
Comment
Apply / Reset Button
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
Virtual Server Mapping List
Lists the Virtual Server Settings you have added before. Click on the list to change
configuration, or the Delete button to delete the list.

Virtual DMZ

The virtual DMZ (Demilitarized Zone) is used to enable protocols, which need to open
ports on the router. The router will forward all unspecified incoming traffic to the host
specified in this page. To configure it, mark to enable virtual DMZ and then enter the
Host IP (private IP address) and click Apply to enact the setting.
Information
Mark to enable the configuration, and clear to
disable.
Select an application for your demand.
Fill in the IP of your LAN Server.
Fill in the port range that you wish to filter.
Select the protocol type of TCP, UDP or Both.
Input any text to describe this mapping, up to
16 alphanumerical characters.
After configure the above settings, click Apply
to add a new list in the following IP / Port Filter
Rule List; or click Reset to reset all the
setting.
45