Security Settings - Netronix W433D User Manual

HT (Hyper Throughput) Physical Mode
Items
Operating Mode
Channel Bandwidth
Guard Interval
Aggregation MSDU
Auto Block ACK
Decline BA Request
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.

Security Settings

The Security function protects your wireless network from invasion. We provide WEP
and WPA encryption to secure your wireless network. As default, the authentication is
configured as safe mode. Please select None/WEP/WPA (Personal) in the drop list. If
you select none, any data will be transmitted without encryption and any station can
access the router.
Items
SSID choice
Security Mode
Information
Select the mixed or green field mode as the
operation mode.
Select the 40Mhz or 20/40Mhz as the channel
bandwidth.
Select 400ns or 800ns as the interval time.
Mark to enable Hyper Throughput TX Aggregate
MAC Service Data Unit, and clear to disable.
Select to block ACK (Acknowledge Number) or
not during data transferring.
Select to reject peer BA-Request or not
Information
Please choose a SSID you have set for this
router in the Wireless Settings > Basic Settings
from the drop-down list. The SSID will be shown
on the wireless network for recognizing.
There are 6 modes for you to select: Open,
Shared, WEP Auto, WPA-PSK, WPA2-PSK, and
WPA-PSKWPA2-PSK. Please refer to the
following description.
30