Table of Contents
Advertisement
General Wireless Advance Settings
Items
BG Protection Mode
Basic Data Rates
Beacon Interval
Data
Beacon
(DTIM)
Fragment Threshold
RTS Threshold
Tx Power
Short Preamble
Information
Some 802.11g wireless adapters support
802.11g protections, which allows the adapter
search for 802.11b/g singles only. Select "Auto"
to turns it on or off automatically, select
"Always On" to support protection or select
"Always Off" to disable this function.
The transfer rate of data packets of this
wireless router. The wireless router will use the
highest possible selected transmission rate to
transmit the data packets. Three selections:
"1-2 Mbps", "Default (1-2-5.5-11 Mbps)", and
"All (1-2-5.5-11-12-24 Mbps)."
Beacons are packets sent by an access point
to synchronize a wireless network. Specify a
beacon interval value. Default (100ms) is
recommended.
Rate
Enter a value between 1 and 255 (default 1) for
the Delivery Traffic Indication Message (DTIM).
A DTIM is a countdown informing clients of the
next window for listening to broadcast and
multicast messages.
This value should remain at its default setting
of 2346. If you experience a high packet error
rate,
you
fragmentation threshold within the value range
of 0 to 2346. Setting the fragmentation
threshold
performance.
Request To Send threshold. This value should
remain at its default setting of 2347. If you
encounter inconsistent data flow, only minor
modifications to the value range between 1
and 2347 are recommended.
Transmit power. You can set the output power
of wireless radio. This value should remain at
its default setting of 100. If you
The length of CRC block in the frames during
28
may
slightly
too
low
may
result
increase
your
in
poor
Advertisement
Table of Contents
