Netronix W433D User Manual page 41

IP / Port Filter Settings
Items
Enable This Rule
Source IP Address /
Port Range
Destination IP
Address / Port Range
Protocol
Comment
Apply / Reset Button
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
IP / Port Filter Rule List
Lists the IP / Port Filter Settings you have added before. Mark the checkbox and
then click on the
clear.
Information
Select to enable or disable the IP/Port filter
function.
Fill in the source IP address and port range that
you wish to filter.
Fill in the destination IP address and port range
that you wish to filter.
Select the protocol type of TCP, UDP or Both.
Input any text to describe this mapping, up to 16
alphanumerical characters.
After configure the above settings, click Apply to
add a new list in the following IP / Port Filter
Rule List; or click Reset to reset all the setting.
button to delete lists, or
41
button to