Netronix W433D User Manual page 22

Items
PPTP Server IP
Address
Username and
Password
Verify Password
MTU
Address Mode
IP Address,
Subnet Mask and
Default Gateway
Host Name
Ping from WAN
WAN Ethernet
MAC
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
Information
Fill in the PPTP Server IP address that provided by
your Internet Service Provider (ISP).
Fill in the User Name and Password that provided by
your ISP.
Retype the password.
To enable the Maximum Transmission Unit of Router
setup. Any packet over this number will be chopped
up into suitable size before sending. Larger number
will enhance the transmission performance.
Enter your MTU number in the text-box to set the
limitation (default 1492 bytes).
Select to use Static or Dynamic IP mode.
Fill in the IP address, Subnet Mask and Default
Gateway that provided by your ISP.
The name of this device. The default name is
"Wireless_11n_Router."
Mark the checkbox to enable others detecting this
device from WAN, and clear the checkbox to disable.
Select to use the following MAC as the MAC address
while serving Internet:
Original MAC: the MAC of the device.
Manual Settings: the MAC of your computer. Click on
"Clone MAC Address from your
your computer MAC address in the blank. You can
also change the MAC address if you need.
22
Computer" to clone