Netronix W433D User Manual page 19

PPPoE (ADSL)
Items
Username and
Password
Verify Password
MTU
MRU
Host Name
Ping from WAN
WAN Ethernet
MAC
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
Information
Fill in the User Name and Password that provided by
your ISP.
Retype the password to confirm.
To enable the Maximum Transmission Unit of Router
setup. Any packet over this number will be chopped
up into suitable size before sending. Larger number
will enhance the transmission performance.
Enter your MTU number in the text-box to set the
limitation (default 1492 bytes).
To enable the Maximum Receiving Unit of Router
setup. Any packet over this number will be chopped
up into suitable size before receiving. Larger number
will enhance the receive performance.
Enter your MRU number in the text-box to set the
limitation (default 1492 bytes).
The name of this device. The default name is
"Wireless_11n_Router."
Mark the checkbox to enable others detecting this
device from WAN, and clear the checkbox to disable.
Select to use the following MAC as the MAC address
while serving Internet:
Original MAC: the MAC of the device.
Manual Settings: the MAC of your computer. Click on
"Clone MAC Address from your
your computer MAC address in the blank. You can
also change the MAC address if you need.
19
Computer" to clone