Netronix W433D User Manual page 20

L2TP
Layer 2 Tunneling Protocol (L2TP), a tunneling protocol used to support virtual
private networks (VPNs).
Items
L2TP Server IP
Address
Username and
Password
Verify Password
MTU
Address Mode
IP Address, Subnet
Mask and Default
Gateway
Host Name
Ping from WAN
Information
Fill in the L2TP Server IP address that provided by
your Internet Service Provider (ISP).
Fill in the User Name and Password that provided
by your ISP.
Retype the password to confirm.
To enable the Maximum Transmission Unit of
Router setup. Any packet over this number will be
chopped up into suitable size before sending.
Larger number will enhance the transmission
performance.
Enter your MTU number in the text-box to set the
limitation (default 1492 bytes).
Select to use Static or Dynamic IP mode.
Fill in the IP address, Subnet Mask and Default
Gateway that provided by your Internet Service
Provider (ISP).
The name of this device. The default name is
"Wireless_11n_Router."
Mark the checkbox to enable others detecting this
20