Netronix W433D User Manual page 37

WPS Summary
Shows the information of WPA current status, configured, SSID, authentication
mode, and pre-shared key. Click on Reset OOB button to Reset WPS AP to the
OOB (out of box) configuration.
WPS Progress
Items
WPS mode
Add Enrollee PIN Code
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
WPS Status
Shows the current WPS status.
1
This button may not supplied depend on your model. Users can click on the Build WPS Connection button in the
WPS settings web page to reach the same function.
Information
PIN method (Personal Identification Number):
read the PIN from either a sticker on the new
STA or a display.
PBC method (Push Button Communication): in
which the user simply has to push a button,
either an actual or virtual one, on both the AP
and the new STA. (Users can simply push the
1
EZsetup button on the front panel of the
device or the Save Settings button in this GUI
page after selecting this mode.)
Users have to fill in the PIN code to enrollee
device if selecting PIN mode as the WPS
Config method.
37