Table of Contents
Advertisement
Other Settings
11
Dynamic Range Control Setup
• Default setting: OFF
This setting specifies the amount of dynamic range
adjustment to Dolby Digital and DTS movie soundtracks.
You may want to use this when listening to surround
sound at low volumes.
1
Select 'DRC Setup' from the Other Setup menu.
2
Choose the setting that you want.
• OFF – No dynamic range adjustment (use when
listening at higher volume).
• MID – Mid setting.
• MAX – Dynamic range is reduced (loud sounds are
reduced in volume while quieter sounds are
increased).
3
When you're finished, press RETURN.
You will return to the Other Setup menu.
Dual Mono Setup
•
Default setting: CH1
You can specify how dual mono encoded Dolby Digital
soundtracks should be played. Dual mono is not widely
used, but is sometimes necessary when two languages
need to be sent to separate channels.
1
Select 'Dual Mono Setup' from the Other Setup
menu.
70
En
6. Other Setup
[
a . DRC Setup
]
[ b . Dual Mono Setup
]
[ c . LFE ATT Setup
]
[ d . SR+ Setup
]
[ e . Multi Room Setup
]
[ f . 12V Trigger Setup
]
[ g . SACD GAIN Setup
]
6a. DRC Setup
DRC
[
OFF
]
6. Other Setup
[ a . DRC Setup
]
[
b . Dual Mono Setup
]
[ c . LFE ATT Setup
]
[ d . SR+ Setup
]
[ e . Multi Room Setup
]
[ f . 12V Trigger Setup
]
[ g . SACD GAIN Setup
]
2
Choose the setting that you want.
6b. Dual Mono Setup
Dual Mono
• CH1 – Only channel 1 is played
• CH2 – Only channel 2 is played
• CH1 CH2 – Both channels are played through the
front speakers
3
When you're finished, press RETURN.
You will return to the Other Setup menu.
Note
• This setting works only with dual mono encoded
Dolby Digital and DTS soundtracks.
Tip
• While the receiver is in standby (using the front
STANDBY/ON button while
panel), press the
holding down the TUNER EDIT button to change the
dual mono setting.
LFE Attenuator Setup
• Default setting: ATT 0 dB
Some Dolby Digital and DTS audio sources include ultra-
low bass tones. Set the LFE attenuator as necessary to
prevent the ultra-low bass tones from distorting the
sound from the speakers.
1
Select 'LFE ATT Setup' from the Other Setup
menu.
6. Other Setup
[ a. DRC Setup
[ b. Dual Mono Setup
[
c. LFE ATT Setup
[ d. SR+ Setup
[ e . Multi Room Setup
[ f . 12V Trigger Setup
[ g . SACD GAIN Setup
2
Choose the setting that you want.
6c. LFE ATT Setup
LFE ATT
• ATT 0dB – No limiting (recommended setting)
[
CH1
]
]
]
]
]
]
]
]
[
ATT 0dB
]
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
