Table of Contents
Advertisement
Other Settings
4
Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
6. Other Setup
[
a . DRC Setup
[ b . Dual Mono Setup
[ c . LFE ATT Setup
[ d . SR+ Setup
[ e . Multi Room Setup
[ f . 12V Trigger Setup
• DRC Setup – Specify the amount of dynamic range
adjustment to Dolby Digital soundtracks (see
Dynamic Range Control Setup below).
• Dual Mono Setup – Isolate one channel when
listening to discs with dual mono encoding (see Dual
Mono Setup below).
• LFE ATT Setup – Choose the attenuator level for the
LFE channel (LFE Attenuator Setup on page 66).
• SR+ Setup – Specify how you want to control your
Pioneer plasma display (SR+ Setup for Pioneer
plasma displays on page 66).
• Multi Room Setup – Specify your volume setting
and IR receiver type for a multi-room setup (see Multi
Room Setup on page 67).
• 12V Trigger Setup – Specify which components are
switched on or off using the 12 volt trigger (see 12 Volt
Trigger Setup on page 67).
5
Make the adjustments necessary for each
setting, pressing RETURN to confirm after each
screen.
Dynamic Range Control Setup
• Default setting: OFF
This setting specifies the amount of dynamic range
adjustment to Dolby Digital and DTS movie soundtracks.
You may want to use this when listening to surround
sound at low volumes.
1
Select 'DRC Setup' from the Other Setup menu.
6. Other Setup
[
a . DRC Setup
[ b . Dual Mono Setup
[ c . LFE ATT Setup
[ d . SR+ Setup
[ e . Multi Room Setup
[ f . 12V Trigger Setup
2
]
]
]
]
]
]
• OFF – No dynamic range adjustment (use when
• MID – Mid setting.
• MAX – Dynamic range is reduced (loud sounds are
3
You will return to the Other Setup menu.
Dual Mono Setup
•
You can specify how dual mono encoded Dolby Digital
soundtracks should be played. Dual mono is not widely
used, but is sometimes necessary when two languages
need to be sent to separate channels.
1
menu.
2
]
]
]
]
• CH1 – Only channel 1 is played
]
]
• CH2 – Only channel 2 is played
• CH1 CH2 – Both channels are played through the
3
You will return to the Other Setup menu.
Choose the setting that you want.
6a. DRC Setup
DRC
[
listening at higher volume).
reduced in volume while quieter sounds are
increased).
When you're finished, press RETURN.
Default setting: CH1
Select 'Dual Mono Setup' from the Other Setup
6. Other Setup
[ a . DRC Setup
[
b . Dual Mono Setup
[ c . LFE ATT Setup
[ d . SR+ Setup
[ e . Multi Room Setup
[ f . 12V Trigger Setup
Choose the setting that you want.
6b. Dual Mono Setup
Dual Mono
[
front speakers
When you're finished, press RETURN.
OFF
]
]
]
]
]
]
]
CH1
]
11
65
En
Advertisement
Table of Contents
