Specifications; Table 6: Specifications - Tektronix OI1125 Instruction Manual

Specifications

Table 6: Specifications

Specification
Modulator Data Input
n
Data Rate
n
Input Amplitude
Input Impedance
Input Electrical Return Loss
Input Duty Cycle
Input Connector
Data Pattern Run Length Limit
Modulator Optical Input
n
Wavelength
n
Input Power
Input Return Loss
Input Connector
Modulator Optical Output
n
Output Power
n
Polarity
Output Return Loss
Modulator Insertion Loss
Output Rise Time
Extinction Ratio
(AC)
n
Output Connector
OI1125 E/O Transmitter Instruction Manual
This section contains the specifications of the OI1125 E/O Transmitter. All
specifications are guaranteed unless labeled "typical". Typical specifications are
provided for your convenience but are not guaranteed. All specifications marked
with the n symbol are guaranteed and have corresponding checks in the
Performance Verification section on page 31.
Description
2.488 Gb/s to 12.5 Gb/s (functional down to less than 622 Mb/s with
degraded performance)
Operating Optical output specifications maintained over an input voltage range of
0.25 to 1.50 V
t2 V
Maximum AC
p-p
t"10 V
Maximum DC
50 W AC coupled
u10 dB, 100 MHz to 8 GHz
45% to 55%
Female SMA jack
100 bits
1530 nm to 1565 nm
Operating +5 dBm to +12 dBm
Maximum +16 dBm
u45 dB
FC/APC with internal Panda-type PMF fiber and dust cover
0 dBm to +4 dBm (with internal laser)
Noninverting
u45 dB
t8 dB
t35 ps
20 - 80%
t5 dB to u12 dB
variable
u12 dB (2.488 Gb/s to 9.953 Gb/s)
nonvariable
u10 dB (9.953 Gb/s to 12.50 Gb/s)
Universal/APC with safety cover (FC adapter is standard)
, except where noted.
p-p
19