Wap Profiles - Siemens M56 User Manual

M56 Barracuda long, am english, A31008-H6350-A40-1-4A19 (28. July 2003,
68
Additional information
Browser menu.
Offline.
Online.
GPRS Online.
No network.
Select special characters,
such as @, ~,
or
press repeatedly for:
. , ? ! ' " 0 - ( ) @ / : _

WAP profiles

Internet
§Menu§
Profiles
Preparation of the phone for WAP
Internet access depends on the cur-
rent service provider:
• The settings have already been
installed by the provider. You can
start immediately.
• Access profiles for a number of
providers have already been set.
Then select and activate profile.
• The access profile must be set
manually.
If necessary, check with your service
provider for details.
Surf & fun
Activate WAP profile
You can change the current profile
each time you access the Internet.
§Select§
Set WAP profile
\ , see p. 30.
Up to 5 WAP profiles can be set (if
not barred by provider). The entries
may vary depending on the service
provider:
§Edit§
Profile name
WAP param.
§Save§
Select profile.
Activate. The current pro-
file is selected.
Select profile.
Open to make settings.
Enter/change name.
IP address:
Enter IP address.
Port:
Enter port number.
Homepage:
Enter homepage, if not set
by the service provider.
GPRS lin-
Time in seconds after which
gertime
a connection should be
ended if no input or data
CSD linger-
exchange takes place.
time
Conn.pro-
Select or set access profile
file:
(p. 82).
Save settings.