Notes A-Z - Siemens M56 User Manual

M56 Barracuda long, am english, A31008-H6350-A40-1-4A19 (28. July 2003,
114
Activate/deactivate tones
Hold down.
In standby mode
All audible signals (including the ring
tone) can be switched off and on
again. The function ends when the
phone is switched off.
During a call:
Switch off the ring tone for the cur-
rent call/alarm (not when
answer, p. 77, is active). Accepting or
rejecting the call ends the function.
• The display will continue to show
a call.
• The silent alert function will
remain active if it was previously
switched on.
• The audio settings are not
changed.

Notes A-Z

Completing phone numbers in
the Phonebook/Addressbook
Digits may be replaced by a "?" when
phone numbers are entered in the
Phonebook/Addressbook:
These wildcards must be replaced
with numbers before dialing (e.g.,
with the extension numbers in a
phone system).
Any to
To make a call, select the phone
number from the Phonebook/
Addressbook.
Hold down.
Press.
Replace "?" with numbers.
Press, number is dialed.