Transferring Data With The Computer (Data Filer) - Yamaha SH-01 Owner's Manual

Transferring data with the computer (Data Filer)

The "Data Filer" application included in the supplied CD-ROM allows conve-
nient transfer of files between the SH-01 and a computer.
1
Use a USB cable to connect the SH-01 to your computer.
2
Switch the SH-01's power ON.
* When the SH-01 is connected to the computer for the first time only, "New hardware detected" will
appear on the display then the driver install wizard may start.
Follow the wizard's instructions to install the driver.
3
Select "SoundSketcher" from the "Start" menu (Start → Program → SoundSketcher).
4
The data filer starts and the following display will appear.
Files can be transferred by dragging icons between the computer (hard disk) and the SH-01
(memory card) as you would normally do to transfer files in the Windows system.
* You can also drag icons of files downloaded from the Internet to the SH-01's folder to automatically
update the SH-01's effect parameter data ("ADD-ON" effect category). Please refer to www.mp3rec.com
for more information.
Computer
(hard disk)
Caution! When Transferring Data
• When data is transferred from the computer to the SH-01 or from the SH-01 to the
computer, the data will be deleted from its origin.
• Data transferred from the computer to the SH-01 can not be backed up with the SH-01.
• The SH-01 can not properly display Japanese file names (2 byte code characters). Also,
mix recording can not be used with files that have Japanese names.
Converting Files with a Computer
(Refer to page 16)
SH-01
(memory card)
37