Troubleshooting - JVC RX-8040B Service Manual

5.1 Self-diagnose function
This model incorporates the following self-diagnostic functions.
5.1.1 Starting of self-diagnostic mode
• Insert power plug into outlet while pressing both "PRESET UP" key and "INPUT ANALOG" key of the main body.
Then, "Self-diagnostic mode" starts.
5.1.2 Displaying of state
• When "Self-diagnostic mode" starts, system Micon version is displayed on the FL display.
Each turning MULTI JOG of the main body in the mode changes a state as follows.
FL display (Code)
S0001
D01
D02
D3
D4
D5
D6
D7
1-16 (No.MB303)

TROUBLESHOOTING

FL display
2004030840
00.00.17
04/02/20
DspRev08
ANALOG02
Fs48kHz
PCM
2/0.0
FL display
Input analog key Preset up key
SECTION 5
System Micon version
DSP Micon version
Changed date of version
DSP version
Setting information
Setting information
Setting information
Channel information
Multi JOG
State