Rear Seat-Back Cover Replacement - Honda Civic 2002 Service Manual

Seats
Rear Seat-back Cover Replacement
NOTE:
. Take care not to tear the seams or damage the seat
covers.
. Put on gloves to protect your hands.
'1.
Remove the seat-back (see page 20-80).
Remove the headrest.
Pull up the latch cover (A) to telease the clips. then
remove it.
Fastener Locations
) : Clip, 4
1W
4 .
Pull up the outside edge of the latch lever cover (A)
to release the clips, and release the cover from the
p i v o t p i n s ( B ) o f t h e l a t c h l e v e r { C ) w h i l e p u l l j n g t h e
latch lever.
Fastener Locations
D : Clip, 2
i\r*
rJ
20-82
5. On right seat-backi Using a Torx T30 bit, remove
the bolts, then remove the belt holder trim (A), and
remove the trim from the center belt (B).
Fastener
) : Bolt,
A*-
\./-
Locations
6 x 1 . 0 m m
9 . 8 N m
(1.0 kgf.m,7.2 lbf.ft)
Release the hook (A), and unzip the seat-back cover
(B). The right seat-back is shown. the left seat-back
i s s i m i l a r .
\