5. With the moonroof wrench. operate the glass (A) to the auto-stop position.
With an open-end wrench, loosen the auto-stop switch
Adjust the auto-stop switch (D):
5 N.m {0.5 kgt.m,4 lbt ft)
m o u n t i n g b o l t s ( C ) .
. N 4 o v e t h e s w i t c h p l a t e ( E ) a l i t t l e a t a t i m e , t h e n s e c u r e i t a t t h e p o s i t i o n w h e r e y o u h e a r a f a i n t c l i c k w h e n t h e
switch cam (F) pushes the switch (auto-stop).
. Check that the switch plate contacts the switch bracket (G ).
Check the operation of the glass by operating the moonroof switch: From the tilt-up position to the fully closed
position, from the fully open position to the auto-stop position, from the auto-stop position to the fully closed
p o s l t r o n .
Check for water leaks. Let the water run fleely from a hose without a nozzle. Do not use a high-pressure spray